LUCKY VARNISH Satin (60mL) - AMMO by MIG Jimenez A.MIG-2052

LUCKY VARNISH Satin A.MIG-2052 is an acrylic finishing varnish by AMMO by MIG Jimenez, supplied in a 60 mL bottle. Its satin finish helps to even out the appearance of a model while preserving a look that sits between matte and gloss.

This varnish can be applied with a brush or an airbrush. It can be used directly from the bottle without thinning. For airbrush application, it is recommended to work in light, short passes at approximately 1.2 bar / 17 psi to avoid overloading the surface with product.

Applying it in thin coats, with a drying time of at least 5 minutes between each veil, promotes a uniform finish. Full curing takes place after 12 hours. Equipment cleaning can be done with water or with the A.MIG-2000 acrylic thinner.

Features

• Brand : AMMO by MIG Jimenez
• Reference : A.MIG-2052
• Type : acrylic finishing varnish
• Finish : satin
• Capacity : 60 mL
• Application : brush or airbrush

A suitable primer, model paints, brushes, or an airbrush naturally complete its use during the finishing steps of a static model.