A-20 Havoc/Boston/ P-70 Nighthawk Wheels for Special Hobby, 1:72 from the manufacturer CMK to scale 1/72 reference 129-7527 Precise resin wheels with printed rims for the A-20 Boston/Havoc/P-70 Nighthawk kits from Special Hobby.

Fiat CR.42 gunsight and compass, 1:32 from the manufacturer Quickboost to scale 1/32 reference QB32 342

Aermacchi MB-326 Cockpit for Italeri, 1:48 from the manufacturer CMK to scale 1/48 reference 129-4493 A beautifully detailed resin molded cockpit designed for the Italeri model of the widely used MB-326 trainer aircraft.

F-16 Seat for Tamiya, 1:72 from the manufacturer Special Hobby to scale 1/72 reference 129-P72044 3D-printed hot seat designed for Tamiya's F-16 kits.

Fw 190A/F/D seat, 1:48 from the manufacturer Aires to scale 1/48 reference 4927

F-111A Open Electronics Boxes for Italeri, 1:72 from the manufacturer CMK to scale 1/72 reference 129-7526 Detailed castings of the open electronics boxes on the left side of the nose and the rear of the fuselage. For the Italeri F-111E kit.

MQM-74A Chukar Target Drone, 1:32 from the manufacturer CMK to scale 1/32 reference 129-P32004 A detailed 3D printed model of the Chukar target drone, developed in the 1960s. The drone was launched from the ground or from a ship from a triangular launcher.

Mosquito Undercarriage Legs for Special Hobby, 1:72 from the manufacturer CMK to scale 1/72 reference 129-P72046 3D-printed landing gear struts made from robust material for Special Hobby Mosquito kits. These struts not only offer fine details, but also make assembly easier.

Dornier Do 217 Wheels Correction Set for ICM, 1:48 from the manufacturer CMK to scale 1/48 reference 129-4499

Vickers Wellington Mainwheels and Tailwheel w/Leg for Special Hobby, 1:72 from the manufacturer CMK to scale 1/72 reference 129-7524 For the re-released Special Hobby Wellington model is prepared this new and better-detailed resin main wheels and tail wheel. The real leg is 3D-printed using...

Escapac 1G-3 ejection seat (for A-4M/N Skyhawk), 1:48 from the manufacturer Aires to scale 1/48 reference 4926

F-111A Cockpit for Italeri, 1:72 from the manufacturer CMK to scale 1/72 reference 129-7525 Detailed cockpit for the Italeri F-111E kit. With additional photo-etched parts.

F-4 Phantom II FOD covers, 1:48 from the manufacturer Quickboost to scale 1/48 reference QB49 166

F-86K Sabre Dog Wheels, 1:48 from the manufacturer CMK to scale 1/48 reference 129-4498 These new resin cast wheels have been designed for kit no. SH48123 and also offer 3D-printed wheel hubs.

M60D with Sagami Mount (2 pcs.) for UH-1B Huey for Trumpeter, 1:35 from the manufacturer CMK to scale 1/35 reference 129-6013 3D-printed set with a pair of M60D machine guns on the Sagami Mouth mounts in the open cabin doors of the UH-1 Huey helicopter. Such armed UH-1 were operated during the...

A-10A/C Thunderbolt II pylons, 1:48 from the manufacturer Aires to scale 1/48 reference 4928