Mosquito Undercarriage Legs for Special Hobby, 1:72 from the manufacturer CMK to scale 1/72 reference 129-P72046 3D-printed landing gear struts made from robust material for Special Hobby Mosquito kits. These struts not only offer fine details, but also make assembly easier.

F-4 Phantom II FOD covers, 1:48 from the manufacturer Quickboost to scale 1/48 reference QB49 166

F-86K Sabre Dog Wheels, 1:48 from the manufacturer CMK to scale 1/48 reference 129-4498 These new resin cast wheels have been designed for kit no. SH48123 and also offer 3D-printed wheel hubs.

F-111A Open Electronics Boxes for Italeri, 1:72 from the manufacturer CMK to scale 1/72 reference 129-7526 Detailed castings of the open electronics boxes on the left side of the nose and the rear of the fuselage. For the Italeri F-111E kit.

F-111A Cockpit for Italeri, 1:72 from the manufacturer CMK to scale 1/72 reference 129-7525 Detailed cockpit for the Italeri F-111E kit. With additional photo-etched parts.

M60D with Sagami Mount (2 pcs.) for UH-1B Huey for Trumpeter, 1:35 from the manufacturer CMK to scale 1/35 reference 129-6013 3D-printed set with a pair of M60D machine guns on the Sagami Mouth mounts in the open cabin doors of the UH-1 Huey helicopter. Such armed UH-1 were operated during the...

Lysander Mk.II (Perseus Engine) Conversion Set for Airfix, 1:48 from the manufacturer CMK to scale 1/48 reference 129-4497 The Lysander Mk. I/III were powered by variants of the Bristol Mercury engine, but the Lysander Mk.

Dornier Do 217 Wheels Correction Set for ICM, 1:48 from the manufacturer CMK to scale 1/48 reference 129-4499

Fiat CR.42 gunsight and compass, 1:32 from the manufacturer Quickboost to scale 1/32 reference QB32 342

MQM-74A Chukar Target Drone, 1:32 from the manufacturer CMK to scale 1/32 reference 129-P32004 A detailed 3D printed model of the Chukar target drone, developed in the 1960s. The drone was launched from the ground or from a ship from a triangular launcher.

F-15D/DJ/E/I Seats for Academy, 1:72 from the manufacturer Special Hobby to scale 1/72 reference 129-P72045 A pair of 3D-printed seats for the two-seat versions of the F-15 Eagle jet.

Vickers Wellington Mainwheels and Tailwheel w/Leg for Special Hobby, 1:72 from the manufacturer CMK to scale 1/72 reference 129-7524 For the re-released Special Hobby Wellington model is prepared this new and better-detailed resin main wheels and tail wheel. The real leg is 3D-printed using...

Escapac 1G-3 ejection seat (for A-4M/N Skyhawk), 1:48 from the manufacturer Aires to scale 1/48 reference 4926

Aermacchi MB-326 Cockpit for Italeri, 1:48 from the manufacturer CMK to scale 1/48 reference 129-4493 A beautifully detailed resin molded cockpit designed for the Italeri model of the widely used MB-326 trainer aircraft.

A-20 Havoc/Boston/ P-70 Nighthawk Wheels for Special Hobby, 1:72 from the manufacturer CMK to scale 1/72 reference 129-7527 Precise resin wheels with printed rims for the A-20 Boston/Havoc/P-70 Nighthawk kits from Special Hobby.

F-16 Seat for Tamiya, 1:72 from the manufacturer Special Hobby to scale 1/72 reference 129-P72044 3D-printed hot seat designed for Tamiya's F-16 kits.