Masking Tape 3 (10mm x 25M) - AMMO by MIG Jimenez A.MIG-8040

Masking Tape 3 AMMO by MIG Jimenez A.MIG-8040 is a masking tape 10 mm wide, supplied on a 25 m roll. It is designed for precise work when painting static model kits.

Used in particular with an airbrush, this tape helps define areas to paint and create shapes or clean separations between shades. Its adhesive is formulated to limit paint seepage under the edge of the tape, while preserving the painted surfaces when removing the mask.

Its strength also allows it to temporarily hold parts in place during gluing or to act as a guide when engraving fine details on plastic parts. The tape cuts easily with scissors or with a well-sharpened blade.

• Brand : AMMO by MIG Jimenez
• Reference : A.MIG-8040
• Type : masking tape for model kits
• Dimensions : 10 mm x 25 m
• Uses : painting masking, airbrush work, temporary holding and engraving guide

For a clean result, apply the tape to a properly prepared surface and press its edge carefully before painting. Remove it carefully once the paint is sufficiently dry.