600 Gallon wing fuel tanks for F-16 & JSDF F2 (CJ/DJ Block 50/52, 50/52+, Sufa) (2 pcs) (3D Printed), 1/48 - ResKit Models RSU48

Detailing set RESKIT Models RSU48-0357 at a scale of 1/48, consisting of two 600-gallon external wing fuel tanks printed in 3D. This accessory is designed to enhance a model of an F-16 CJ/DJ from Blocks 50/52 and 50/52+, as well as an F-2 from the Japan Air Self-Defense Force and an F-16I Sufa.

External fuel tanks for fighter aircraft at 1/48 scale

Additional tanks are part of the external equipment that immediately changes the silhouette of a modern fighter aircraft. Their installation makes it possible to depict a configuration with underwing fuel carriage, particularly suited to an F-16 or F-2 project at 1/48.

At a scale of 1/48, each dimension of the real subject is reduced forty-eight times. This set is an addition for customizing a build and enhancing the level of detail of an aircraft model that is already assembled or under construction.

Assembly and painting

3D-printed parts require careful preparation before fitting. Any printing supports must be removed carefully using suitable cutting tools. A light cleaning of the contact areas can make it easier to fit the pieces onto the model’s attachment points.

A coat of primer suitable for 3D-printed parts allows you to check the surface condition before painting. The finish can then be matched to the aircraft’s livery being modeled, and completed with a light weathering/patina if the project calls for it.

Technical characteristics

• Brand : RESKIT Models
• Reference : RSU48-0357
• Type : external wing fuel tanks
• Subject : 600-gallon tanks for F-16 and F-2
• Scale : 1/48
• Manufacturing : 3D printing
• Contents : 2 tanks
• Indicated compatibility : F-16 CJ/DJ Block 50/52 and 50/52+, F-16I Sufa, Japanese F-2

Complementary products

For preparation and finishing, a modeling-appropriate glue, primer, fine abrasives, precision tools, and the paints needed for the chosen decoration are useful additions.